Secure cable gripper hanging fixings

Description

Secure picture hanging with adjustable cable gripper

Secure screw-on cable gripper attaches to the back of a picture frame or graphic display panel to enable anti-theft and fully adjustable picture hanging on vertical wires.  Small neat design of the self-locking cable grippers belies the strength of the strong locking mechanism. These high security picture hanging fixings can be used in pairs or four screw-on frame fixings can be used, espeically when tiered displays are used on floor-to-ceiling cable kits (available separately).

Panel fixing clips attach panels to vertical wires

Butterfly brackets are neat panel fixing clips for attaching graphic panels, display boards, acoustic panels and the like onto vertical wires.  The small butterfly-shape panel fixing clips are screwed onto the back or sides of a panel or frame. They are then threaded onto pre-installed 1.5mm diameter hanging wires, spaced apart at the correct centres to match the panel fixing brackets.

• Panel hanging brackets are quick to install with an inbuilt cable gripper mechanism. 
• Fine height adjustment is made easy with the finger-release clutch built into each fitting.
• These panel fixing clips are made from a satin finish alloy casting (nickel plated).  
• The screw-on fixings are sold singly, but are generally used in pairs or more often in fours (near the corners of the panel or picture frame). 
• Hanging wires can be fixed to the wall or to the ceiling, with the weight of the panel acting as tensioner. 
• Alternatively, we offer floor-to-ceiling kits where the vertical wire can be tensioned - select according to your application. See below.

Each fitting can support a 10kg load provided that the panel material is soundly receptive to screw fixings and the hanging wire is adequately anchored to the wall, soffit or ceiling. With 4 panel fixings we recommend the panel weight is limited to 25kg to allow a good margin of safety.