Current COVID-19 Status | Normal Service

Adjustable hanging kit screws to ceiling

  • Adjustable hanging kit screws to ceiling securing a suspension wire - either 1m or 2m long 
  • The kit includes an Urban Trapeze fitting used to form a loop around the item to be suspended 
  • Use the hanging kit to secure a wide range of suspended items up to 15 kg safe load per wire 

Adjustable hanging kit screws to ceiling

From £3.70
Description/Code 1-1920+50+250+ QTY ex VAT Order
 
Total

Description

Hanging wire kit to suspend items at any height 

Adjustable hanging wire kit includes a neat thimble-size anchor fitting which can be screwed to a ceiling or rafter. This ceiling anchor secures the hanging wire, either 1m or 2m long depending on the kit selected.

The hanging wire set includes a fitting which makes it easy to form a loop around the item to be suspended. The loop is easily adjusted in size and can be set at any height up to the overall length of the wire.

Easy way to hang stuff from the ceiling

  • Use this hanging wire kit for multiple purposes including hanging plants, decor, banner poles, light fittings, signage, stage props or merchandising displays in shop windows. 
  • Choose the kit with either a 1m or 2m wire, which is pre-terminated at one end to be captured securely in the ceiling anchor > Excess wire can be coiled up or cut off using wire cutters.
  • The suspension kit is rated up to 15 kg safe working load (with a 5:1 margin of safety which we always recommend for overhead suspension). This applies to a vertical load as opposed to when the wire is used horizontally to create a light duty catenary cable. 
  • Ensure that the intended location will accept a screw and support the intended load. Basic masonry plugs are included in the kit but can be upgraded by using alternative proprietary fixings (see Assembly and Installation Tab) e.g. for hanging from plasterboard ceilings.
  • The bottom loop is created easily using the supplied Urban Trapeze fitting. The fitting grips the wire internally - but the grippers can be released temporarily for stepless adjustment, simply by depressing the cable entry buttons (see animated visual).
  • The wire is 7x7 galvanised steel diameter 1.5mm - which is strong yet slender.
  • This hanging kit is designed to look good as well as being structurally reliable and easy to install.
Download Data Sheet Download Data Sheet