Table top base for rigid sign panels

Curved clip-on bases for small printed sign panels and display boards
Base only for your printed signboard up to 6mm thick

From £3.48 From £2.90

Description/Code	1-19	20+	50+	100+		QTY	ex VAT	Order
	Total Qty
Prices shown are ex VAT	Total

Qty

Paper Size	Approx	Exact
A7		7 x 10 cm	3 x 4 inch	74 x 105 mm	2-7/8" x 4-1/8"
A6		10 x 15 cm	4 x 6 inch	105 x 148 mm	4-1/8" x 5-7/8"
1/4 A4		7 x 21 cm	3 x 8 inch	74 x 210 mm	2-7/8" x 8-1/4"
DL	1/3 A4	10 x 21 cm	4 x 8 inch	99 x 210 mm	3-7/8" x 8-1/4"
1/2 A4		10 x 30 cm	4 x 12 inch	105 x 297 mm	4-1/8" x 11-3/4"
A5		15 x 21 cm	6 x 8 inch	148 x 210 mm	5-7/8" x 8-1/4"
A4		21 x 30 cm	8 x 12 inch	210 x 297 mm	8-1/4" x 11-3/4"
A3		30 x 42 cm	12 x 16.5 inch	297 x 420 mm	11-3/4" x 16-1/2"
A2		42 x 65 cm	16.5 x 23 inch	420 x 594 mm	16-1/2" x 23-3/8"
A1		59 x 84 cm	23 x 33 inch	594 x 841 mm	23-3/8" x 33-1/8"
A0		84 x 119 cm	33 x 47 inch	841 x 1188 mm	33-1/8" x 46-3/4"

Description

Snap action clip on poster board holders

Looking for a base to hold a poster board or other rigid panel upright to stand it on a table? The snapper base could be your answer, available in several sizes to hold display boards from A6 up to A3 size.

Snap clip-on bases for rigid panels are classy modern curved metal bases. They are ideal for holding custom made printed panels or rigid sign boards up to 6mm (1/4 in) thick to display your signs, notices and menu systems on table tops.

The curved-shape base is made from silver anodised aluminium and very stable.
An ingenious spring action built into the base allows a rigid panel to be inserted and held firmly.
A number of size widths are available - 105mm (4in), 148mm (6in), 210mm (8in) and 297mm (12in).
Can be used singly or in pairs to support larger signs.
Easy to use - recycleable at end of life.

Download Data Sheet