A6 and A5 Snap frame in silver or black

Want to compare these with A4 Snap Frame?

Features of A5 Snap Frame and A6 Snap Frame - Opti Frame range.

• Supplied individually boxed.  Complete with clear plastic cover sheet. Ready to fit
•  Just snap open the frame to change inserts. Super slim 14mm wide silver anodised aluminium frame surround. 
• Can be fixed directly to most types of wall or door.    No need to remove from wall to update.
•  Ideal for notices which need to be changed frequently - even every day.
•  Select your own screws to suit the application, or use double-sided adhesive tape (the frames are very light).
• Can also be hung on a pin or nail either portrait or landscape.

Size Information for Opti snap frames

• The width of the surround is 1.4cm = 14mm
• Front to back depth of 14mm profile snap frame: 13.2mm
• A6 relates to the size of paper an A6 frame will fit.
• A narrow strip around the edge of your print is hidden when the frame is closed.
  Visible poster size: 10mm less than actual poster (i.e. 5mm all round your poster is hidden by the frame surround) 
• The overall size of the frame is larger than the paper inserted.
  Overall (external) frame sizes are shown in the table:

Table of Opti snap frame sizes - relates to 14mm wide profile frames

Opti frames are supplied fully assembled and individually boxed.

Hang Opti frames on a picture hook

• Smaller Opti snap frames up to and including A3 size can be hung on a single picture pin nailed into the wall.
• The back of the frame provides this facility whether the frame is to be mounted portrait or landscape 
• Hanging a snap frame on a picture hook, nail or tack only requires a hammer. 
• Picture hooksand tacks are not supplied. They are available from hardware stores.

Fix Opti frames using screws

• The usual way to permanently fix Opti frames is with screws.
• Screws and plastic wall plugs are not supplied as these frames can be fixed to diffent surfaces. 
• When screwing onto wood wall plugs are not needed 
• A drill and screwdriver are required for screw fixing (and we recommend using a spirit level and tape measure to ensure the frames are properly aligned). If in doubt please consult a proficient DIY or trades person.

Fix Opti frames using adhesive tape

• Rolls of double-side adhesive tape are available as an accessory item.
• If double-side adhesive tape is used to fix frames please check the smoothness and suitability of the wall.
• Tiles and similar surfaces are generally suitable provided they are cleaned thoroughly before application.
• Tape fixing is not suitable for surfaces with a non-stick coating or porous/foamed surfaces. 
• We recommend that tape is used around the full perimeter of the frame.
• Larger frames are normally best screwed. A residue of foam tape will be left on the wall or door after removal of the frame and the frame will usually be hard to get off.