Current COVID-19 Status | Normal Service

Large adhesive hanging plate 100x100mm

  • 10 cm square hanging plate with adhesive backing to stick to back of frame or graphic panel
  • Enables a frame or graphic with adhesive receptive reverse to be hung on a picture hook 
  • Suitable graphics for up to 3.5 kg - such as a typical A2 or A1 aluminium poster frame

Large adhesive hanging plate 100x100mm

From £3.30
Description/Code 1-910+30+ QTY ex VAT Order
Total

Description

Large Adhesive Hanging Plate

Adhesive backed hanging plate with easy-release liner measures 100mm high by 100mm wide. The plate can be applied to almost any smooth and non flaky back panel to provide an easy way to hang the graphic from the wall.

The safe working load when in shear (on a vertical wall) is 3.5kg. They are sold singly as an accessory for mounting our poster frames such as black magnetic frames. They are suitable for supporting A2 and A1 size. (There is a smaller plate for smaller size frames).

Fixing without drilling the wall

  1. To hang a frame on a picture hook, nail or picture pin without the need for drilling the wall. 
  2. A solvent wipe is provided with each mounting plate to prepare the mounting area on the back of the frame. Allow solvent to evaporate completely before applying the plate.
  3. Adhesive Mounting Plates used singly should be stuck to the top centre of the frame backing sheet, positioned hard up against the underside of the frame top member. 
  4. Apply the plate with firm pressure at room temperature to allow a good bond to develop. 
  5. Once the adhesive has cured the frame can be hung on the picture hook or nail.
Download Data Sheet Download Data Sheet