Frameless wall document display holder

 ClearView frameless wall document display holder 

This frameless wall document display holder by ClearView fits A4 and A3 size prints. The A3 wall sign holder fits A3 paper (297mm x 420mm) and can be mounted landscape or portrait. The hinge is on the long side - so when fitted portrait the 'door' opens to the side.  The A3 model does not have a thumbhole whereas both A4 models have thumbholes at the top. 

Create your own signs or use pre-printed posters, advertisements or sales particulars.

This product matches ClearWindow range - a similar design but with a cut-out 'write-on' open area in the front face for creating, ticking or initialling lists and schedules. 

Fixing is very easy and no tools are required.  Each A4 ClearView holder is supplied with four circular clear adhesive discs made from a stong gel adhesive.  A3 size comes with six sticky clear discs.  They will grab and hold permanently onto smooth surfaces such as plastered wall, ceramic tiles and glass.  

ClearView makes an excellent window sign holder mounted directly on glass

Suitable surfaces on which to fix ClearView holders  

Some walls have an anti-graffiti coating to prevent contaminants from sticking - and that can affect our adhesive.  If in doubt please check one unit stuck up overnight (or longer) before fixing multiple ClearView holders.  In the unlikely event that the adhesive pads do not perform as expected please contact us regarding alternative fixing options (e.g. drilling into the wall and screwing).

As with any adhesive system, it is important that the wall is clean, completely free of grease and dry before application.  Firm pressure is required over the adhesive fixing points to ensure a good bond is formed.

Adhesive fixings of this type are not suitable for flaky substrates, rough timber, or bare brickwork.

ClearView is not intended for outdoor use as paper inserts will get wet.