Black poster display cases

Black poster case is perfect for the display of a single poster

• Black poster cases are mainly intended to display a poster matched to the size of the case - the poster is secured by plastic clips concealed behind the rim of the door.  
• As well as displaying posters printed on paper the display case will accept thicker card and other flexible substrates up to 1.5mm thick.

If you wish to use a Poster Case as a notice board (e.g. for multiple A4 sheets rather than a single poster) the individual notices will need to be secured to the back panel by sticky dots or Blu Tack.  There isn't sufficient space behind the door for pin heads and moreover the backing board in not designed to accept pins or thumb tacks.

Condensation

Condensation on the inside of the door can occur under certain atmospheric conditions. It is the same situation as inside a car windscreen where condensation can occur without implying that rain has actually entered.

Typically on a cold night after a humid day the water vapour in the air can condense on any cold surface (such as the glazed door or car windscreen) and this is unavoidable. In most situations any misting clears of its own accord as the glass (or clear plastic) warms up again.

Key things to consider.

• The viewable area will be smaller than the physical poster size by 20mm all round.
• Maximum thickness of poster must be no more than 1.5mm.
• The frame width is 45mm (viewed from the front).