Sign Holders
Display systems for signs, posters & literature
Buy online
or call us
We're Hiring!
Job vacancy for a Management Trainee
FREE Delivery
UK mainland orders over 99 ex VAT ship FREE
NEXT DAY
Delivery service available on most products
01489 896999
Browse from our range of products all available for online purchasing

Snap frame, poster case, notice board - How they work

Home > Snap frame, poster case, notice board - How they work

Snap frame

Slot-in frame

Curved face frame

Poster case / noticeboard

 

Snap frame - How it works

Open snap frame showing print inserted behind poster protector 
Snap frames are easy to fix. Open up the four sides of the frame - they click open by hand - to reveal the holes provided for screwing to the wall. Fixings are supplied with every snap frame. If you are not sure how to fix to a wall seek help from a person with the necessary skills.
 
What snap frames are used to display.  Every snap frame comes with a poster protector is shipped inside the frame. Because it is clear plastic it is easy to miss it, but look for the finger-lift indentation half way down one side. Pop your poster or print into the frame behind the poster protector. Remember only to use paper or thin card - thick card or board will stop the frame from closing correctly and unsightly gaps will be visible at the corners.
 
Snap frames are easy to use. The aluminium edge profiles are spring loaded. They come safely to rest in either the fully open or fully closed positions.  No special skill is needed to change posters.
 
 
 
 

Frame with poster slot - How it works

 
Plastic slot-in frame showing print slid in from the top
Top loading or side entry poster frames.  Several of our frames feature an open slot in one edge of the frame where the poster is inserted, usually  in one of the short sides. If the frame is used portrait (upright) the slot is at the top, as pictured.
 
If the frame is used landscape the print is slotted in from the side. You can order a small clear plastic poster retention clip which attaches over the opening to stop the poster wriggling out sideways.
 
Various ways to fix slot-in frames.  Clips for fastening, hanging or supporting the frames also need to be ordered separately. This is because there are different ways to fix these types of frame - wall fasteners, hanging clips, feet etc.
The clips generally attach to the raised rim incorporated into the frame edge profile.  Some frames come with self-adhesive pads for wall fixing (only suitable for smooth clean indoor surfaces)
 
Backing sheet offers valuable benefits.  Slim Frames and Woodline Frames are supplied with a backing sheet (included in the price). This is a sheet of semi-rigid fluted plastic which supports paper prints and holds the print 'forward' in the frame so it is well presented. For outdoor applications they stop inserts blowing out.  Most suppliers do not include these backing sheets but we consider them important.
 
Poster Protectors are optional accessories. They are thin clear plastic sheets made from anti-glare material - to cut down on distracting reflections. They are not required if you are planning to use laminated paper prints in Slim frames.
 
 
 

Curved face sign holder - How it works

The front cover is flexed into position 
Our Eclips curved-face print holders have an aluminium profile running down each side of the frame. This profile has two channels incorprated into it: the rear channel accepts the back panel; the front channel secures the clear acrylic cover.  Both the back panel and front cover are flexed into place after fixing the frame in place.
 
Hidden wall fixings.  Before the back panel is fitted the frame can be screwed to the wall - the fixings are then hidden behind the back panel.  Small frames can be struck to the wall if preferred using double-sided adhesive pads - but only onto smooth clean surfaces.
 
Changing the poster.  The back panel is intentionally stiff as it gives the curved front its rigidity, but once flexed into place it can stay there permanently. The front cover (which clips into the front channel) is flexed into place after the print has been inserted. It can be removed for changing the poster with the help of a suction cup (supplied).
 
No need to remove end caps.  The two brushed stainless steel curved end caps do not need to be removed to change the poster. Once  screwed to the edge profiles, securing them at the right distance apart, they do not usually need to be removed.
 
 
 

Poster case/noticeboard - How it works

Hinged door postercase showing a poster clip detail
 
Difference between a Poster Case and a Notice Board.
 
The lockable poster case and notice board each has a hinged door. However unlike a notice board, which is intended for displaying several sheets of paper or notices, the Poster Case is intended for displaying a single poster.  The poster case and poster size should be synchronised - i.e. an A2 poster case is intended for an A2 poster.
 
In this way the edge of the poster - or menu, notice or whatever - can be retained correctly by the plastic Poster Clips positioned around the perimeter of the poster case.  The back panel is not intended to accept pins and there is no space for pin heads behind the front glazing.
 
In contrast, notice boards are designed to create a gap, thus leaving space for pin heads or magnetic fixing buttons, depending on the style of noticeboard (cork-back or magnetic dry-wipe).  With a Notice Board there is no problem in displaying several sheets of paper simultaneously.
 
Fixing poster cases and Series 30 notice boards.  Wall fixings are provided.  In the case of the Poster Case and Series 30 Notice Board the unit is screwed through the aluminium frame surround: fixing holes are only visible when the door is open.  The product is designed so that if any rain water does seep in around the fixing holes it can drain out from the bottom of the case without coming into contact with the poster. 
 
Fixing Series 50 notice boards.  Series 50 Notice Boards have an independent wall fixing rail so no water should enter the unit. This unit is 'hung' on the supplied rails and locked in position with grub screws located in the bottom of the case. (Grub screws and rail are simply re-located to the appropriate side if  the unit is to be fixed in landscape mode or if the door is to be hinged to the right).  Only two grub screws are required per notice board (they always go at the bottom).
 
Please note that due to changes in atmospheric humidity condensation can occur in any poster case or notice board - just like it will occur inside car windows even when the car does not leak, or inside the windows of your home.
 
 
 
 
Click here to go to Sign-Holders.co.uk home page
 
 
Basket (ex VAT)
You have 0 items
Total £0.00
Incl. VAT £0.00
View basket
Social Links Twitter Facebook Tips, techniques and sign making