|
Grip Strip is designed to be screwed through the base of the U-channel section. Pre-punched holes at regular spacings provide labour saving starter holes for screwing. We recommend screw fixing about every 400mm using small wood screws (not included).
The channel can face up or down. In outdoor situations it is important that the frame is backed by a board, trellis etc. so that wind does not dislodge the frame. View large illustration to see a typical setup.
Indoors frames can protrude from Grip Strip without any other means of support - either standing up from a gondola top and sticking out from a wall or column.
The frames are simply pushed into the Grip Strip and they hold tightly yet can be removed by pulling out at right angles.
Grip Strip is also known as a plastic U-channel sign holder system.
|