A1 Pavement sign with curved base

Great value water based pavement signs like this are found on every high street and shopping mall. This A1 pavement or forecourt sign is perfect for outdoor use in malls and precincts - it is also sold as an A1 Whirlwind or A1 Sightmaster 2 pavement sign.

Heavy duty curved plastic base (mid grey colour) has a filler cap through which you add water to act as ballast.
Two springs connect to base to the frame so that excess wind force can be disippated.
A1 silver snap frame provides double sided display of your pavement advertising.
Posters (not supplied) can be changed easily by opening up the frame border - no tools required.
The attractively curved base has wheels and also incorporates a handle to make moving it simple.
For more severe exposure situations or when a fully waterproof frame is required you may wish to consider our higher specification WindPro and Windcheater models.

Description/Code	Each	5+	20+	50+
A1 Waterbase pavement sign WB.A1 RRP: £105.00	Sale item £95.00	£85.50	£77.90	£71.25

Specification of A1 water based Pavement Sign

Attractive silver anodised design with rounded corners for safety.
Snap frames are provided each side to display A1 size posters (poster size: 594mm wide x 841mm high; approx 23in x 33in)
Posters must be sourced separately. The frames are equipped with protective cover sheets (but unlike the frames on our higher spec pavement signs they are not guaranteed to completely waterproof your prints).
Overall height 1092mm (43")
Overall width of base 780mm (31")
Base needs to be filled with water or sand to make the pavement sign stable outdoors. Base colour is mid grey.
Waterbase capacity approx 25 litres
Weight when fill of water approx 35kg
Easy assembly. Easily moved by tipping onto the inbuilt wheels and rolling along.

Assembly Instructions

You will find the box containes two spring assemblies together with the double-sided poster frame and the base. The base should be filled with water after assembly and before use outdoors.

Unscrew the metal wing bolt with metal washer from the spring assemblies. Both black spring units, complete with their black plastic threaded fittings at each end of the spring, should be screwed into the bottom of the frame. The frame with springs attached should then be located into the grey plastic base. From beneath the base the wing bolts should be passed through the metal washers and inserted up through the base. Once engaged in the thread inside the springs the wing bolts should be fully tightened by hand.

Related products:

Water fillable WindPro - silver

Water-fill base WindPro - black