A2 Eclips frame

A2 Eclips comprises aluminium edge extrusions joined by brushed stainless steel end caps which are secured by screws in the 4 corners. The unit is fixed to the wall by screwing through the back of the frame. The styrene back panel is then flexed into place secured in the rear groove of the edge members. The print and front cover then fit into the front grove in a similar manner (by flexing). The front cover ends flush with the front of the frame, forming an attractive curve. The front acrylic lens can be removed with the aid of a suction cup - supplied. It is very hard to remove without this simple tool which offers tamper resistance and security. Frames can be fixed either way round (portrait or landscape).